Basement Floor Epoxy Coating in Indianapolis, IN
A seamless full flake floor that water can't soak into, over our GatorShield moisture-mitigating base coat. Most jobs are finished in two days, with a lifetime warranty.
Act Fast — Limited Time Offer!
FALL INTO SAVINGS SALE!
20% OFF ALL FLOORS
Save 20% + 0% Financing Available!
Coat before the first freeze. Ask about our current specials.
Had Water in Your Basement?
A lot of the basement calls we get in Indianapolis start the same way: a sump pump failed or a storm got in, and the carpet, padding or vinyl plank had to come out. A coated floor is the one you don't have to tear out next time.
Nothing to soak up water
A coated floor has no seams, padding or glue to soak up water, so a small leak or spill is a cleanup, not a tear-out.
No more musty carpet smell
Floor coatings eliminate the musty dampness that comes with basement carpeting, pet odors included.
Water from below stays below
Our coating is impenetrable to water coming up from below, and we repair every crack with moisture-mitigating epoxy repair compound before we coat.
We take the old floor out
We remove any existing floor covering, so you do not have to pull up the carpet, tile or vinyl yourself.
What we don't do: we don't waterproof entire basements. We protect the floor. If old tile turns out to contain asbestos, we can look at encapsulating it in epoxy, or we'll point you to a remediation provider.
GatorShield Goes Down on Every Floor
Basements sit below grade, and in the Midwest hydrostatic pressure pushes water vapor up through the slab all year. That vapor is the #1 cause of coating failures, so every basement we coat across Greater Indianapolis gets the same protection.
- 1
Measured at your estimate
We check the slab with a professional-grade Tramex moisture meter before we quote.
- 2
Ground and repaired
We diamond grind the concrete down to a clean surface and repair every crack with moisture-mitigating epoxy repair compound.
- 3
GatorShield first, on every floor
GatorShield, our moisture-mitigating epoxy (MME) base coat, goes down before anything else, whatever the moisture reading says. It is never an extra.
What Makes GatorGuard's 4-Layer System Different?
GatorGuard's system is engineered to address every common point of failure in concrete coatings, resulting in a permanent solution backed by a lifetime warranty. It's an investment in your home's value and functionality, not just a temporary floor covering.
We don't sell a simple epoxy floor. We install a hybrid epoxy polyaspartic system designed for the demanding climate of the Midwest.
Moisture Mitigating Epoxy (MME)
This is our secret weapon. After diamond grinding, we apply this specialized epoxy that penetrates deep into the concrete and creates a permanent barrier against moisture vapor transmission, the #1 cause of coating failures.
Base Color Coat
We apply a thick, pigmented epoxy layer that forms the core strength and color foundation of your floor.
Decorative Flake Layer
We broadcast decorative vinyl flakes to the point of rejection, meaning the entire surface is covered. This creates the beautiful, granite-like appearance and adds texture and impact resistance.
Polyaspartic Clear Coat
To seal it all in, we apply our 100% UV-stable, scratch- and chemical-resistant polyaspartic topcoat. This provides a durable, easy-to-clean finish that will never yellow or stain.
The Result: A Permanent Floor
This hybrid epoxy and polyaspartic system is engineered to last 20+ years, compared to just 1-3 years for a DIY epoxy kit. Every installation is backed by our Lifetime Warranty.
Plus, we handle everything with our white-glove service, including carefully moving your items out and back in. We also offer flexible financing options to make the investment manageable.
Fast Installation: Most Floors Finished in Two Days
Every GatorGuard floor in Indianapolis is installed by our own highly-trained, in-house installers. We do not subcontract the work out, so the people who quote your job are the people who do it and the people who warranty it.
- Before
Free in-home estimate
We measure the floor, inspect the concrete for cracks and moisture, and show you the flake and color samples. You get a written, no-obligation quote on the spot. No charge and no pressure.
- Day 1
Grind, repair, prime and color
Our crew moves your belongings out, diamond grinds the slab down to clean concrete, repairs cracks and pitting, then applies the moisture-mitigating epoxy and the pigmented base coat with decorative flake broadcast to rejection.
- Day 2
Buff, seal and final walkthrough
We buff the excess flake back to a smooth surface and apply the UV-stable polyaspartic clear coat. Then we walk the finished floor with you before we leave.
- After
Walk on it in 24 hours, park on it in 72
Polyaspartic cures much faster than epoxy. You can walk on the floor 24 hours after the final coat, we come back at 48 hours to move your belongings in, and you can park on it at 72. The floor is covered by our lifetime warranty from day one.
Low-VOC and low-odor materials
Our materials are low-VOC and low-odor (where applicable), posing no more harm than the smell of a new car or new carpet, which minimizes any lingering chemical smell much faster during the curing process.
Book Your Free Estimate: 888-863-7710How Much Does an Epoxy Basement Floor Cost in Indianapolis?
Honestly: it depends on your floor, and anyone quoting you a price over the phone without seeing it is guessing. What we can tell you is exactly what drives the number, so you know what you are being quoted on before anyone comes out.
Square footage
A one-car garage, a three-car garage and a full basement are very different jobs. Size is the single biggest factor in your quote.
The condition of your concrete
Cracks, pitting, spalling, old failing epoxy or previous sealer all have to be dealt with before we coat. A slab in good shape costs less to prepare than one that needs repair.
What has to come up first
Old epoxy paint, sealer, carpet glue, tile or vinyl. We remove any existing floor covering as part of the job, and how much there is to take up affects the time it takes.
The finish you choose
Full decorative flake, a solid color, or a metallic finish each price differently. You pick from the samples during your in-home estimate.
Why it costs more than a DIY epoxy kit
A big-box epoxy kit is cheap because it is one thin coat of paint over an acid-etched slab. It typically peels within one to three years, and stripping a failed coating costs more than doing it properly the first time. Our price includes diamond grinding, our GatorShield moisture-mitigating base coat on every floor, four engineered layers, our own trained crews, and a lifetime warranty.
Low monthly payments and affordable payment options
You do not have to pay for the whole project up front. We offer flexible financing with payments as low as $45 a month, plus 0% financing options, so the cost fits a monthly budget instead of a lump sum.
Get your exact price, free
We measure your floor, check the concrete and the moisture, show you the finish samples, and give you a written, no-obligation quote in Indianapolis. No pressure and no charge.
Basement Epoxy Floors We Have Coated
Real basement floors we have coated in full flake: decorative flake across the whole floor for a granite-like look and texture underfoot, over GatorShield and under a UV-stable polyaspartic clear coat.
Looking for an Epoxy Floor Company Near You in Indianapolis?
GatorGuard of Indianapolis is a local concrete coating company, not a national call center routing your job to whoever bids lowest. We are based at 4343 Saguaro Trail, Indianapolis, IN 46268, and every installation is done by GatorGuard's own trained employees. We never use third-party contractors.
Most people who search for epoxy companies or concrete coating companies near me end up looking at national franchises that sell the lead on, or at a crew that etches and rolls one thin coat. Whether you are comparing floor coating companies, epoxy installers or concrete floor coating contractors, ask any garage flooring contractor near you two questions before you sign: do you diamond grind, and what do you do about moisture in the slab. Our answers are on this page.
Indiana road salt and repeated freeze-thaw cycles work salt and water down into untreated garage slabs, which is what lifts a coating off the concrete.
Garage, basement and pool deck coatings across Greater Indianapolis
Communities we install in every week:
- Indianapolis
- Carmel
- Fishers
- Westfield
- Noblesville
- Brownsburg
- Greenwood
- Greenfield
- Avon
- Zionsville
Don't see your town? We cover the wider Indianapolis, IN metro. Call and ask.
Low Monthly Payment Options
Payments as Low as $45 a Month
Payment options available, so you do not have to pay for your epoxy floor up front. Flexible financing and 0% options spread the cost over low monthly payments, so a garage floor that lasts 20+ years fits the same budget as a coating that does not.
Get Your Free QuoteWhat Our Indianapolis Customers Say
Get Your Free Basement Floor Quote
Tell us about your basement and we'll come measure it, check the slab with a moisture meter and give you a written price. Free, no obligation, and we'll get back to you within 24 hours.
Coating a garage instead? See our garage floor coatings.
Basement Floor Coating Questions, Answered
What Indianapolis homeowners ask us most often before they book an estimate.
How much does an epoxy basement floor cost?
It depends on the size of the basement, the condition of the concrete, what has to come up first, and the finish you choose. GatorShield, our moisture-mitigating base coat, is included on every floor. We measure in person and give you a written quote for free, and financing is available with payments as low as $45 a month.
Is a coated basement floor waterproof?
Our coating is impenetrable to water coming up from below, and there are no seams, padding or glue for water to soak into, so a small leak or spill is a cleanup instead of a tear-out. We do not waterproof entire basements; the coating protects the floor.
Can you coat a basement floor that has flooded?
Yes. At the free estimate we check the slab with a professional-grade Tramex moisture meter. On the job we diamond grind the concrete, repair the cracks with moisture-mitigating epoxy repair compound, and put GatorShield down first, as we do on every floor.
What happens if my basement floods again after it is coated?
The floor should hold without issue. If it ever delaminates or peels, our lifetime warranty covers the repair, up to a full floor redo once.
Do I have to pull up my carpet, tile or vinyl first?
No. We remove any existing floor covering as part of the job, then diamond grind the slab down to clean concrete.
What if my old floor tile contains asbestos?
We can look at encapsulating the existing floor in epoxy, or we will suggest a remediation provider. We inspect floors; we are not asbestos remediators.
Will a coated floor get rid of the musty basement smell?
Floor coatings eliminate the musty dampness associated with basement carpeting, including pet odors.
Why does basement floor paint from the hardware store peel?
Two reasons. First, prep: a DIY kit relies on acid etching, which does not open the concrete the way diamond grinding does, so the coating never really bonds. Second, moisture: water vapor moves up through a basement slab constantly, and with nothing to stop it, it pushes the coating off from underneath. That is why we grind, and why GatorShield goes down first on every floor.
How long does a basement floor take?
Most jobs are completed in two days. Day one is diamond grinding, any concrete repair, the moisture-mitigating epoxy and the base color coat with flake. Day two is buffing the flake back and applying the polyaspartic clear coat. You can walk on it after 24 hours, and we come back at 48 hours to move your belongings in.
What is a full flake floor?
Full flake, also called full chip or full broadcast, means decorative vinyl flake covers the entire surface. It gives the floor a granite-like look and adds texture and impact resistance. You choose your blend from the samples at your estimate.
Will the coating smell, and is it safe around my family?
Our materials are low-VOC and low-odor (where applicable) compared with traditional solvent-based epoxy. What you notice while the floor cures poses no more harm than the smell of a new car or new carpet, and it clears much faster than a solvent-based system does. In warmer months it can take a little longer to fade.
Is a full flake basement floor slippery?
The decorative flake gives the surface texture, and we can add extra anti-slip aggregate to the clear coat for anywhere that gets wet.